Rc522 Proteus Library Guide

void loop() // Look for new cards if (!mfrc522.PICC_IsNewCardPresent()) return;

Introduction The RC522 is arguably the most popular RFID/NFC module for hobbyists and engineers working with Arduino, PIC, and AVR microcontrollers. Its low cost (often under $5) and ability to read and write 13.56MHz Mifare Classic cards make it a staple in access control, inventory systems, and smart locking mechanisms. rc522 proteus library

However, before soldering a single wire or risking physical hardware, every smart developer simulates first. This is where Proteus Design Suite (specifically Proteus ISIS) shines. But there is a catch: void loop() // Look for new cards if (

// Select one card if (!mfrc522.PICC_ReadCardSerial()) return; This is where Proteus Design Suite (specifically Proteus

// Show UID on serial monitor Serial.print("Card UID: "); for (byte i = 0; i < mfrc522.uid.size; i++) Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "); Serial.print(mfrc522.uid.uidByte[i], HEX);

Serial.println();

MFRC522 mfrc522(SS_PIN, RST_PIN);