In plain English: Your MacBook thinks it is asleep (low power) while Windows runs it at full throttle. The audio driver receives a "sleep" command, shuts down, and never wakes up.
If you own a MacBook Pro 2012 (either the 13-inch or 15-inch Unibody model) and have installed Windows 10 via Boot Camp, you may have encountered a maddening problem: your laptop runs scorching hot, the fans sound like jet engines, and—most frustrating of all—the audio either stops working, crackles, or disappears entirely from the Device Manager. macbook pro 2012 audio driver windows 10 hot
The official CS4208.inf contains a PowerSettings section that disables the audio codec’s thermal monitoring. Apple assumed the SMC would handle all thermal events. However, Windows 10’s "Modern Standby" (S0 Low Power Idle) overrides the SMC. In plain English: Your MacBook thinks it is
Download a free tool like Open Hardware Monitor or HWMonitor . Run it on Windows 10. If any core is above 85°C at idle (nothing open except the monitor), you have the thermal problem. The official CS4208
Do not use Apple’s Boot Camp audio drivers for Windows 10 on the 2012 model. They are unsafe for your hardware. Part 7: Real-World Testing – Before & After Data I performed this fix on a MacBook Pro 15-inch (Mid 2012, i7-3720QM, 16GB RAM, GT 650M).
The audio hardware on the 2012 MacBook Pro is a Cirrus Logic CS4206A/CS4207B codec, connected via the High Definition Audio (HDA) bus. This chip is located near the PCH (Platform Controller Hub) and the left-side I/O ports—an area that becomes exceptionally hot due to poor thermal dissipation.