Cut two slits in the leather pouch (if not pre-cut). Insert the free ends of your bands through the slits from the back. Fold the band tips over and tie them with floss. Again, use the lighter to melt the folded tip into a "mushroom" so it cannot pull back through the slit. Method 2: The Clip-On (Flip Clip) Install Modern Big Shot frames often feature recessed clamps or "Flip Clips." This is the easiest big shot install for beginners.
Use a Phillips head screwdriver to remove the two screws holding the flip clip onto the fork. big shot install
In this guide, we will walk you through every inch of the installation process, from selecting the right latex to tying the final knot. Before diving into the step-by-step, it is crucial to understand why "Big Shot" and "install" are inseparable terms in the slingshot community. The Big Shot frame is typically made from cast aluminum or dense polymer, featuring swept-back forks and a deep, comfortable grip. Unlike wooden handmade slingshots, the Big Shot often has pre-drilled holes or specific attachment grooves designed for tubular latex . Cut two slits in the leather pouch (if not pre-cut)
Take one end of the latex tube and fold it back onto itself to create a small loop. Insert this loop through the hole in the fork from the front (shooting side) to the back (grip side). Again, use the lighter to melt the folded
Using unwaxed dental floss, tightly wrap the knot 10 to 15 times. This prevents the knot from slipping under tension. Many beginners skip the wrap; experienced shooters know that dry latex on smooth aluminum will slide. Finish the wrap with a surgeon’s knot and a drop of superglue (optional).
Pull the loose, long end of the band through the small loop you just pushed through the hole. Pull tight. This creates a "slip knot" or "girth hitch" around the fork post. For a big shot install, you must ensure the knot cinches flush against the frame—not protruding outward.